Finding ways to keep kids moving indoors, especially during colder months, has always been important to us. One of the best upgrades we’ve made to our home is installing a ceiling hook in our basement for hanging play equipment. It’s been a surprisingly simple DIY project with a huge payoff.

In this post, I’m sharing how we installed a ceiling hook into a ceiling joist, the exact products we used, and what we’ve learned since installing it. While I’m not a contractor or structural engineer, this is a straightforward DIY that worked well for our family and our space.

For quick links, here are the SWING PRODUCTS we own.

PINK TENT ONLY AT TARGET.COM

And here is the INSTALLATION HARDWARE we used

Disclosure: This post contains affiliate links. I may earn a small commission at no extra cost to you.

Why We Chose a Ceiling Hook for Indoor Play

We wanted an indoor play solution that:

  • Encouraged movement and gross motor play

  • Didn’t take up valuable floor space

  • Could grow with our kids

  • Was more versatile than bulky freestanding equipment

Installing a ceiling hook allowed us to use vertical space we weren’t otherwise using, while keeping our basement open and functional. Once installed properly into a ceiling joist, it creates a strong anchor point for a variety of hanging play options.

The Exact Installation Products We Used (From Lowe’s)

These are the actual physical hardware items we used to install our ceiling hook, all sourced from Lowe’s:

How to Install a Ceiling Hook Into a Joist (How We Did It)

Step 1: Locate the Ceiling Joist

Using a stud finder, locate a ceiling joist. This step is critical—a ceiling hook should always be installed directly into a joist, never just drywall. We have a partially finished basement. So we had the luxury of being able to see the joists before installation.

Step 2: Measure and Plan Placement

We measured ceiling height and checked the surrounding clearance to ensure there was enough space for safe movement once the hanging equipment was installed.

Step 3: Pre-Drill

Following the hardware instructions, we pre-drilled into the joist using the appropriate drill bit size for the lag screw. This helps prevent splitting and makes installation smoother.

Step 4: Install the Hook Hardware

Using a lag screw, we secured the ceiling hook into the joist, tightening until it was flush and stable.

Tip: Use a screwdriver to twist the ceiling hook once it gets too difficult to twist with your hands.

Step 5: Test Before Use

Before letting our kids use it, we tested the hook for stability, movement, and weight tolerance. Once everything felt solid, we attached the hanging equipment.

Why This Ceiling Hook Installation Was Such a Good Investment

Since installing it, this setup has:

  • Encouraged daily movement and active play

  • Become one of the most-used features in our home

  • Adapted easily as our kids grow and change interests

It’s one of those projects that feels small in scope but has made a big difference in how we use our space.

Hanging Play Products We Use With Our Ceiling Hook

Rope Tree Swing

Seated swing for sensory input and movement

Snuggle Pod

 A cozy hideout for swinging and chillin

Ninja-Twister swing

A family favorite that doubles as a strength builder

Large Pink Tent

For multiple high energy kiddos to enjoy at once

Baby Bucket Swing

For babies ages 6-36 months

Pulley Rope System

Hours of STEM exploration

Knitted Swing
Comfy swinging seat for older kiddos

All items attach easily to our ceiling hook and allow for a flexible, space-saving indoor play setup. Affiliate links included

Real Relatable Motherhood

© 2026, All Rights Reserved.